Comparison between the AFNOR Method and the Imposition of Balanced Maximum Specific Sliding in the Imposed Centre Distance Problem

Main Article Content

Pedro Freitas
António Francisco Tenreiro
Paulo M. S. T. de Castro

Abstract

Successive editions of Henriot’s treatise on gears, and an AFNOR document, present an approximate procedure for the choice of profile shift values for the pinion and wheel when a center distance value is imposed in a cylindrical gear pair. That procedure aims at achieving an approximate balancing of the maximum specific sliding values of the pinion and of the wheel. The method involves a loosely defined choice of an auxiliary parameter, but no information is available relating this choice with the level of attainment of the intended balancing of maximum specific sliding values. This assessment, if needed, requires a subsequent analysis for verification.
Since no information is available evaluating the procedure, the purpose of this work is to provide a thorough rigorous analysis of the method, highlighting its qualities but also its shortcomings.

Downloads

Download data is not yet available.

Article Details

Author Biographies

Pedro Freitas, Universidade do Porto

Departamento de Engenharia Mecânica

Faculdade de Engenharia

Universidade do Porto

Rua Dr. Roberto Frias

4200-465 PORTO

Portugal

António Francisco Tenreiro, Universidade do Porto

Departamento de Engenharia Mecânica

Faculdade de Engenharia

Universidade do Porto

Rua Dr. Roberto Frias

4200-465 PORTO

Portugal

Paulo M. S. T. de Castro, Universidade do Porto

Departamento de Engenharia Mecânica

Faculdade de Engenharia

Universidade do Porto

Rua Dr. Roberto Frias

4200-465 PORTO

Portugal